Roof dismantling

Roof dismantling belongs to the segment of high-altitude works, which require mandatory compliance with construction GOSTs and safety standards. Dismantling of roofing materials always occurs in a certain sequence in order to preserve the load-bearing properties of the remaining structure. It is extremely important to entrust such work exclusively to experienced specialists who have everything necessary for high-quality performance of the service. The company LLC "RSK ALBA" offers this service, providing it mainly in a turnkey format.

Important points when dismantling the roof

This type of work involves the complexity of carrying out and performing the removal of the old roof covering. Most often, the main reason for ordering this service is the wear and tear of the roofing materials and the need to replace them. Usually, the roof is dismantled during major repairs, reconstruction, or when it is necessary to improve the thermal insulation properties of a house, hangar, garage or warehouse.

The most important rule in this case, which professional workers adhere to, is to disassemble the material exclusively from top to bottom - from the ridge to the eaves. Thus, they manage not to violate the stability of the rafter system. Other important points that are worth paying attention to are the following:

• Protection from precipitation. Work should be planned for dry and windless weather. For unforeseen situations, you need to take care of the presence of a protective film to cover the surface from moisture.
• Human safety. At all stages, it is extremely important to use scaffolding, safety systems, special protective clothing, etc. The work area under the roof must be fenced off.
• Shutting off communications. Before starting work, antennas, air conditioners and electrical networks must be removed from the roof.

It is also necessary to think in advance about a system for safely lowering waste and heavy debris from above. For this, special equipment or gutters are usually used.

Stages of roof dismantling

For the correct organization of the process, it is extremely important to adhere to the selected scheme. Deviation from it is possible only in the event of unforeseen circumstances. The basic algorithm of actions is as follows:

• A specialist visits the site to inspect the scope of work. First, the type of building covering material from which the roof is formed is determined - slate, bitumen tiles, metal tiles, etc.
• Preparation. Construction crew workers bring scaffolding equipment and necessary tools to the work site.
• Dismantling work. First, the finishing elements are removed, the upper parts are removed. Large pieces are sawn for convenient descent down. Next, the insulation, waterproofing, cornices and other roof components are removed.
• Removing the old rafter system from the beams. This stage is necessary only in the case of raising or lowering the roof line or during its reconstruction.

Finally, the site is cleaned and garbage is removed.

Specifics of removing roofs from different materials

Dismantling methods and selection of the main tool for work is determined by the type of materials for the manufacture of the roof. The most often used technologies are as follows:

• For ceramic tiles. It is removed by disconnecting the fasteners between the elements, then it is folded in the attic and lowered down only after dismantling the entire canvas.
• For corrugated board and metal tiles. Since the sheets of this material are fixed to the crate with self-tapping screws, a screwdriver or an electric drill is used in the work.
• For a soft roof. This material is removed by cutting or chopping into pieces using an ax or a chisel. Disassembly is recommended to be carried out in cool weather to prevent mastic from sticking to the tool.
• For slate. Corrugated sheets are removed using a nail cutter. Elements are removed in reverse order - from top to bottom.
• For a folded roof - first one fold is opened, after which the following elements are gradually raised, turning over in a row. Then the folds are separated and go down to the attic.

Our company will provide dismantling of the roof at the best price. To order the service, you need to fill out the form on the website or call the manager.